ProMinent DULCOTROL DWCa, Assembly And Operating Instructions Manual, Page: 27 / 140

6.1.1 Measuring point
Select the mounting height so that:
n
The controller's LCD display can be easily read
n
The controller cover can still be parked in the "Park position"
n
There is still space for maintenance work underneath the
bypass fitting
n
There is sufficient room outside of the plate to fit accessories
The following drilling dimensions should be observed:
Fig. 4: Drilling template
The selection of the measuring plate depends on the bypass fitting
used and the number of controllers used.
The following applies in principle:
n
with 1 controller: Size 1
n
with 2 controllers: Size 2
Labelling 1 controller 2 controllers
A 745 mm 800 mm
B 595 mm 800 mm
C 705 mm 760 mm
D 555 mm 760 mm
Secure the DULCOTROL ® measuring/control station, as close as
possible to the point of injection using hanger bolts. Leave an ade‐
quate gap from the wall for the cables on the back of the plate.
Assembling the measuring point
27