4 Assembly
n
Users' qualifications: trained qualified
personnel, see
Electrolyte filling
NOTICE!
Perform the following work over a sink
After this, carefully re-close the electrolyte
bottle. Unclosed electrolyte bottles may
severely limit the storage period of the elec‐
trolytes.
1.
Remove the red end cap and cut off the
top end of the spout with a knife.
2.
Screw the sensor cap (1) and the sensor
cap protector (2) off from the sensor shaft
A0107
1
2
Fig. 2: Sensor cap (1) with sensor cap protector
(2)
3.
With the sensor cap protector plugged
on, place the sensor cap onto a working
surface
ð
The sensor cap protector seals the
bottom of the sensor cap.
Assembly
18
