ProMinent DULCOnvert, Installation And Configuration Manual, Page: 3 / 24

1 Prerequisites
The pump must have enhanced PROFIBUS ® functionality by
means of a plug-in module. To do this, insert the plug-in module
into the front of the pump (similar to a relay module). The menu
item “PROFIBUS
®
then appears in the operating menu.
The pump requires a minimum of software version
V01.03.06.00 (delta ® DLTa) or V01.01.00.00
(Sigma Control SxCb) and hardware version
V01.04.00.00 for the delta
®
for the PROFIBUS
®
module to work correctly. If it is not working, the
LED on the PROFIBUS
®
module flashes slowly red
and green.
The pump can then be extended with PROFINET ® functionality via
the DULCOnvert converter.
Prerequisites
3