ProMinent Dulcometer DMT, Supplementary Instructions Manual

Page: 35 / 106

1.2 Adjustment
The setting process is cancelled if during setting of the DMT no entries are made for
> 60 s.
The PROFIBUS ® -DMT is ajdusted in operating mode
[Bus-OFF]
analogously to the
standard DMT, only bus functionality is added. You can only change the operating mode
in [Bus-ON] operating mode
Setting the PROFIBUS
®
address
Briefly interrupt the supply voltage after setting the PROFIBUS
®
supply voltage
Parameter Profibus
Mode: Bus-ON
Address: = 125
Mode: Bus-ON
Address: = 125
A0893_EN
Fig. 1: Setting the PROFIBUS ® address
ð
Then the PROFIBUS ® address is accepted.
Settings / GSD file
35