ProMinent DULCO Trans 32/700 PP, Assembly And Operating Instructions Manual, Page: 12 / 36

2.5.2 Safety information for the pump nozzle
WARNING!
Danger from hazardous substances!
Possible consequence: Fatal or very serious inju‐
ries.
Please ensure when handling hazardous sub‐
stances that you have read the latest safety data
sheets provided by the manufacture of the haz‐
ardous substance. The actions required are
described in the safety data sheet. Check the
safety data sheet regularly and replace, if neces‐
sary, as the hazard potential of a substance can be
re-evaluated at any time based on new findings.
The system operator is responsible for ensuring
that these safety data sheets are available and that
they are kept up to date, as well as for producing
an associated hazard assessment for the worksta‐
tions affected.
Non-observance of the safety information
Non-observance of the safety information can lead
to damage to people and the environment and also
result in damage to the pump nozzle.
n
Only pump clean liquids.
n
When using, note the maximum operating pressure of 2 bar at
50 °C (PP design) or 2 bar at 60 °C (PVDF design). The pump
nozzle can bounce back.
n
When filling into a storage tank, make sure that no overpres‐
sure can build up in this storage tank. Danger from spraying
liquids.
n
Do not fill up too quickly to prevent the liquids from splashing
out of the storage tank.
n
Only bend the hose slightly to prevent too high mechanical
stresses being exerted on the pump nozzle
n
Only fill up using the pump nozzle under supervision, as the
nozzle does not automatically shut off.
n
Check during commissioning whether the manual lever returns
automatically into its starting position.
n
Use visual controls to regularly monitor the external condition
of the pump nozzle.
n
Allow the pump nozzle to drain at the end of the filling process.
n
Regularly check to make sure that the hose clips are fixed
securely.
n
Remove any spilled liquid and dispose of it in an environmen‐
tally-friendly manner, referring to the material safety data
sheets issued by the manufacturer of the hazardous material.
n
Note any internal instructions.
n
Wear protective clothing, referring to the material safety data
sheets issued by the manufacturer of the hazardous material.
n
Do not expose the pump nozzle to weathering.
n
Clean the pump nozzle after each use, referring to the material
safety data sheets issued by the manufacturer of the haz‐
ardous material.
n
Do not store the pump nozzle in aggressive fumes.
Safety chapter
12