Pr
o
Minent
®
Page 20
Identcode
Identity Code Ordering System For In-Line Probe Housing Modules
D G M
F l o w H o u s i n g M o d u l e
A
Series Version
Flow monitor module:
0
No flow monitor
1
With l/h scale
2
With gph scale (US)
3
With flow sensor, l/h scale
4
With flow sensor, gph scale (US)
Number of PG 13.5 modules:
0
No PG 13.5 modules
1
One PG 13.5 module
2
Two PG 13.5 modules
3
Three PG 13.5 modules
4
Four PG 13.5 modules
Number of 25 mm modules:
0
No 25 mm modules
1
One 25 mm module*
2
Two 25 mm modules*
*assembly set required (791818)
Main material:
T
Transparent PVC
Seal material:
0
FPM-A
Connections:
0
8 x 5 hose
1
PVC DN 10 threaded connector
9
Connector nipple/expansion module
Versions:
0
With ProMinent
®
logo
1
Without ProMinent
®
logo
DGM
A
3
2
1
T
0
0
0
Accessories included:
Wall mounting
for PG 13.5 module:
calibration cup
PG 13.5 sensor assembly set
The identity code below describes a fully assembled combination of
flow monitor with sensor, two PG 13.5 modules (e.g. for pH and redox
sensor) and a 25 mm module (e.g. for chlorine sensor CLE 3). Fitted with
8 x 5 hose connector.
Recommended accessories:
Order No.
Sensor mounting kit 25 mm
(CLE, BRE, CGE, CTE, CDE, OZE):
791818
for potential equaliser: plug
791663
flow sensor
791635
additional calibration cup
791229
Sampling Tap for DGM
for 13.5 module
1004737
for 25 mm module
1004739
FPM = Fluoroelastomer
BA_DTZ_019_03_10_4spr.p65
31.10.2011, 8:41 Uhr
20
