5
promesstec GmbH
I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: [email protected] I Internet: www.promesstec.com
1. General
1.1 For Information
-
These operating manual provides important information on handling the
measuring element. A prerequisite for safe working is compliance with all
specified safety notes and instuctions for action.
-
The qualified personnel must have read and understood these operating manual
before mounting and starting up the sensor.
-
These operating manual is a component part of the product. Therefore, keep
them in a place that is accessible to all users at all times, close to the place of
use.
-
The local regulations and safety rules applicable to the area of application of the
sensor must be observed.
-
If the serial number on the type label is no longer readable (e.g. due to
mechanical damage), traceability is no longer ensure.
-
The sensor described in the user manual are developed and manufactured
according to the newest finding. All components are subject strict quality and
environmental criteria during production.
-
The manufacturer shall not be liable if damage is caused by improper use,
non-observance of these operating instructions, use of insufficiently qualified
personnel and unauthorized modifications to the sensor.
1.2 Signs and abbreviations
Warning!
Non-observance can lead to injuries to persons and / or destuction of
the device. There may be danger to life.
Attention!
Non-observance can lead to incorrect operation of the device or
damage to property.
Information!
Non-observance can influence the operation of the device or cause
undesired device reactions.
Danger!
If the safety instructions are not observed, there is a risk of serious or
fatal injury from electric current.
UREG 200
