USER’S MANUAL. TV EXPLORER II/II+
12/2013
Page
81
En
g
lis
h
5.20
PRINT SCREEN function (only TV EXPLORER
II+
)
It is also possible to save anything that appears on the screen of the meter using
the “
PRINT SCREEN
” function. To save an image you only need to press the key
[10] during a few seconds. A file with the screen content in bit map format (bmp) will
be generated automatically. These files can be viewed later on using any program that
supports .bmp formats.
To delete one or more of the captured images, press
[22] and select
DELETE
PRINT SCREEN
. You will see a list of captured screens files. To delete a file, place on it
and press the rotary selector [1]. To delete all stored files place on
ALL
option and press
the rotary selector [1].
NOTE:
You cannot use this function in the case of
OSD
messages.
5.21
TV Operating Mode
When pressing the
[10] key from any mode of operation the
TV EXPLORER II
/ II+
accedes to the
TV mode
, and tries to demodules on the monitor the currently video
signal on tune.
In the monitor will appear the TV picture with a window on the lower part to show,
for five seconds whenever the signal is analogue; the channel number, the frequency,
the active channel set, the colour system and the TV standard.
CHANNEL:
CCIR
FR:
S10
MHz
168.25
50 Hz
PAL BG
Figure 59.-
Analogue channel monitoring.
