Promax RANGER Neo 2, User Manual

Page: 63 / 349

October 2021 51 Chapter 3: SETTINGS AND PREFERENCES
pressing any key. Time options are: off, 1, 5, 10 or 30 minutes.
„
Color System: The coding system used in analogue transmissions.
Available options are: PAL 50 Hz, PAL 60 Hz, PAL-M, NTSC and SECAM.
„
Values Format: It allows the user to select the format to show on fields
PID, NID, ONID, TSID and SID in TV mode screen 3/3 and on field SID in
“Select Service” tool. Available formats are decimal or hexadecimal.
„
Touchscreen Calibration: Press on F4 to run a test to calibrate the
touchscreen. Just follow the instructions and press on each circle at corner
and centre to calibrate.
►
Time & Date Options
„
Date: It allows the user to edit the date. Press the joystick for edit mode.
„
Time: It allows the user to edit the time. Press the joystick for edit mode.
„
Date Format: It allows the user to change the date format, which is the
order in which is shown day (DD), month (MM) and year (YYYY or YY).
„
Time Zone: It allows the user to select continent and country/city where
the meter is in order to determine if it is necessary to apply DST (Daylight
Saving Time).
►
Measurement Options
„
Terrestrial Units: It allows the user to select the terrestrial measurement
units for the signal level. Available options are: dBm dBmV and dB
µ
V.
„
Satellite Units: It allows the user to select the satellite measurement units
for the signal level. Available options are: dBm, dBmV and dB
µ V.
„
Optical Units: It allows the user to select the optical measurement units
for the signal level. Available options are: dBm.
„
Satellite Band: It allows the user to select the type of satellite band used
between Ku/Ka band and C band.
„
Reference Level: It allows the user to select the type of reference level
adjustment between manual (modified by the user) or automatic (selected
by the equipment).
„
TER. Downlink: If this option is enabled it allows you to set a local
oscillator in terrestrial band from Settings
and it displays intermediate
and downlink (DL) frequencies calculated from local oscillator. For
example, it allows you to work with terrestrial radio-links or frequency
converters.
„
Position Tone: The user can select where at the voltage to insert a 22 kHz
tone: Up, Center or Down. The tone will be inserted on the top, in the
center or below the LNB tension respectively.
„
Min. TER. Power: It sets the minimum power for a terrestrial digital signal