Promax RANGER Neo 2 User Manual Download Page 217

Page: 217 / 349

October 2021

205

Chapter 8: OTT

Bitrate of segments download. Graph scrolls to right while segments

downloading.

Standard status.

Softkeys menus (for more details refer to next section).

Joystick functions:

•Joystick up/down: Decreases/Increases time span.

Axis description:

•Axis X: Time Span (s).

•Axis Y: Download size (bytes). This axis re-scales according to biggest

value.

At the bottom of the screen there are some menus available via the function

keys.

URL: It shows a screen with a list of available URL from which

download segments. It also allows you to import URLs from a file on a

pendrive. This pendrive must have a file named OTT.URL on the root in

order to be imported.

View: There are two options:

•Presentation Description: It shows a MPD file in text format.

•Presentation Parameters: It shows most common MPD parameters.

8.3.3

Menu Options

Summary of Contents for RANGER Neo 2






























































































































































































































































































































































Search results

Summary of Contents for RANGER Neo 2

Reviews:

Related manuals for RANGER Neo 2

Brands by name

Popular brands

Promax RANGER Neo 2, User Manual

Search results

Summary of Contents for RANGER Neo 2

Reviews:

Related manuals for RANGER Neo 2

Brands by name

Popular brands