OD-590
Series are powered by 1 GS/s real time and
25 GS/s equivalent time sampling rate combined with
3 types of acquisition modes. 25k points of deep memory
guide us into further signal details. 4 types of flexible triggers
add another signal capturing flexibility.
Signal detection
The last panel setting is internally stored in non-volatile
memory, ready to be recovered on the next power up . If you
want to transfer the setup to another
OD-590
Series,
you can save and recall setup files using USB flash drive.
You can always recover the default system setting.
Setup Recovery and Transfer
IEEE remote control commands include most of the panel
operations and the syntax conforms to IEEE 488.2 standard.
PC software allows you to use your oscilloscope utilizing the
larger PC screen. Three types of remote control interface
are provided: USB, RS-232C and GPIB (optional).
Remote Access
OD-590
USB host connector transfers data quickly and
easily between USB flash drive, which guarantees almost
unlimited amount of memory. Internal storage includes
4 sets of reference waveform and 20 sets of general-use
memory area.
OD-590
Series handle three types of data:
BMP image for viewing waveform shape and pasting into
documents and presentations, panel setting for saving and
restoring system setup, and waveform configuration for
further analysis of signal information. Printout of display
image, is available through the printer connected to the USB
host port.
Data Transfer and Printout
A variety of measurement shortcuts drastically reduce repetitive
manual operations. Autoset automatically configures the
horizontal & vertical scale and the trigger, giving an instant view
of almost any signal. 27 types of automatic measurements
include voltage, frequency, and delay.
OD-590
Series run and
update results of all the relevant measurements in real time. Add
and subtract math operation, with 4 types of FFT are also
provided. Go/NoGo test function detects a user-defined
incoming waveform shape, and can also send a signal to
external devices in case of detection.
Program & play
feature
automatically runs predefined sequence and setup, boosting
productivity in routine measurements.
Measurement functions
Battery power operation option with typical 3 hours of
running time gives a much-desired mobility. Built-in
self-calibration and probe compensation help maintaining
maximum accuracy. You can make the oscilloscope talk your
language by choosing between a variety of languages.
Portability & Friendly user Interface
Large 5.6-in TFT Color Display
200 / 100 MHz Bandwidth
2 and 4 input channels
1 GS/s Real-Time and 25 GS/s Equivalent-Time Sampling
25k Points Record Length Maximum
27 Automatic Measurements
Three Math Functions: “+”, “-” and “FFT”
Multi-Language Support
USB Host: Flash Drive Storage and External Printer
USB Device: PC Remote Control
Battery Power Operation (Optional)
GPIB & RS-232C Interface
OD-590 Series
SPECIFICATIONS
OD-590
OD-591
OD-592
VERTICAL
Channels
2
2
4
Bandwidth
DC ~ 100 MHz (-3 dB)
DC ~ 200 MHz (-3 dB)
Rise Time
3.5 ns Approx.
1.75 ns Approx.
Sensitivity
2 mV / div ~ 5V/div (1-2-5 increments)
Accuracy
± (3% x |Readout| + 0.05 div x Volts/div + 0.8 mV)
Input Coupling
AC, DC & Ground
Input Impedance
1 M
Ω
± 2%, ~16 pF
Polarity
Normal & Invert
Maximum Input
300 V (DC + AC peak), CAT II
Waveform Signal Process
+, -, FFT
Offset Range
2 mV/div ~ 20 mV/div: ± 0.5 V
50 mV/div ~ 200 mV/div: ± 5 V
500 mV/div ~ 2V/div: ± 50 V
5 V/div: ± 300 V
Bandwidth Limit
20 MHz (-3 dB)
TRIGGER
Sources
CH1, CH2, Line, EXT
CH1, CH2, CH3, CH3, Line
Modes
Auto-Level, AUTO, NORMAL, SINGLE, TV, Edge,
Pulse Width Time-delay (2 CH Only), Event-Delay (2 CH Only)
Coupling
AC, DC, LF rej., HF rej., Noise rej.
Sensitivity
DC ~ 25 MHz: approx 0.5 div or 5 mV
25 MHz ~ 100 / 200 MHz: Approx. 1 div or 10 div
EXT TRIGGER
Range
+ 15 V
Sensitivity
DC ~ 30 MHz: ~ 50 mV
30 MHz ~ 100 / 200 MHz: ~ 100 mV
Input Impedance
1 M
Ω
~ 2%, ~ 16 pF
Maximum Input
300 V (DC + AC peak), CAT II
HORIZONTAL
Range
1 ns / div ~ 10 s/div (1-2-5 increments); ROLL: 250 ms/div ~ 10s/div
Modes
MAIN, WINDOW, WINDOW ZOOM, ROLL, SCN, X-Y
Accuracy
± 0.01%
Pre-Trigger
20 div maximum
Post-Trigger
1000 div
X-Y MODE
X-Axis Input
Channel 1 (X-Axis Input); Channel 2 (Y-Axis Input)
Phase Shift
±3º at 100 kHz
SIGNAL ACQUISITION
Real-Time Sample Rate
1 GS/s maximum
Equivalent Sample Rate
25 GS/s maximum
Vertical Resolution
8 bits
Record Length
25 K Dots maximum
Acquisition Mode
Normal, Peak Detect, Average
Peak Detection
10 ns
Average
2, 4, 8, 16, 32, 64, 128, 256
CURSORS AND MEASUREMENT
Voltage Measurement
V
pp
, V
amp
, V
avg
, V
rms
, V
hi
, V
lo
, V
max
, V
min
, Rise Preshoot / Overshoot, Fall Preshoot / Overshoot
Time Measurement
Freq, Period, Rise time, Fall Time, Positive Width, Negative Width, Duty Cycle
Delay Measurement
Eight different delay measurement
Cursors Measurement
Voltage difference between cursors (
∆
V) Time Difference between cursors (
∆
T)
Auto Counter
Resolution: 6 digits; Accuracy: ± 2%
Signal Source: All Available trigger source except the Video Trigger mode
CONTROL PANEL FUNCTION
Autoset
Adjust Vertical VOLT/DIV, Horizontal TIME/DIV, and Trigger level automatically
Save Setup
Up to 20 sets of measurement conditions
Save Waveform
24 sets of waveform
DISPLAY
Color TFT LCD Type
5.6 inch
Display Resolution
234 (Vertically) x 320 (Horizontally) Dots
Display Reticule
8x10 divisions; 8x12 divisions (menu off)
Display Brightness
Adjustable
INTERFACE
Go/NoGo Output
5 V Maximum / 10 mA TTL Open Collector Output
RS-232 Interface
DB 9-pin male DTE RS-232 interface
GPIG Interface (Option)
Fully programmable with IEEE 488.2 compliance
USB
USB Host/Device 2.0 full speed supported
POWER SOURCE
Line Voltage Range
AC 100 ~ 240 V, 48 ~ 63 Hz, Auto selection
Battery Power (Option)
Battery: 11.1 V Li-Ion battery pack
Charge Time: 8 hours (Power ON); Operating Time: 3 hours, depending on operating condition
MISCELLANEOUS
Multi-Language Menu & Online Help
Available
Time Clock
Time and Date, Provide the Date/Time for the saved data
DIMENSIONS & WEIGHT
243 D. x 142 H. x 310 W. (mm); approx. 4.3 kg
Bandwidth
Channels
Display
Sample Rate
Record length
Trigger
Valued features
Interfaces
OSD
Power Source
100 MHz
2
5.6” TFT Color LCD
1 GS/s
25k pts
Pulse Width, TV Line,
Event Delay, Time Delay
Multi-Language, FFT, Go/NoGo,
Auto Setup, 27 Auto-Measures
2xUSB (Host/Device), RS-232C,
Go/NoGo Output, GPIB (optional)
Multi-Language Menu
Multi-Language Online Help
AC 100 ~ 240 V
Optional Li-Ion battery pack
200 MHz
2
200 MHz
4
outstanding specifications
OD-590
OD-591
OD-592
OD-592
200
MHz
4
channels
PROMAX ELECTRONICA, S.A.
Francesc Moragas, 71 * 08907 L'HOSPITALET * SPAIN
Tel: (+34) 93 260 20 02 * Fax: (+34) 93 338 11 26 * e-mail: [email protected] * www.promax.es
S
pecifications subject to change without notice. 0 IP4584
OD-591
200
MHz
2
channels
OD-590
100
MHz
2
channels
200
MHz
