Promax NGM EVO, User Manual, Page: 11 / 32

11
NGM EVO USER GUIDE
4.4 Ethernet Port
The Ethernet port, allows the NGMEVO to communicate with other devices, llike PC and others. On data
exchange level, it complies 10 BaseT and 100 BaseT standards.
About protocols, it can be used in many ways:

NGMEVO to PC communication, about on-line assistance. In this case it's used a PROMAX specific
protocol;

PLC and other devices communication, with ModBus TCP/IP protocol;
4.4.1 Connections
The on board connector, complies the RJ45 standard,
It's recommended to use PC with Ethernet ports complies this standard. It's recommended to use cables
length conformed the standard.
The connection cable can be CROSSOVER or NORMAL
The port is automatically adapted to cable type
WARNING
USE THE CABLE FOR ETHERNET COMMUNICATION
WARNING
WITH THE ETHERNET PORT, ISN’T POSSIBLE TO UPLOAD
FIRMAWARE OR VTB APPLICATION