CONTROL MODULE.
DT-802
To get into the available settings of a particular module, press
ENTER
when
the module is displayed on the screen.
Every time you see a display module, the
LED
program of this module began to
blink.
4.7.2 Browsing the SETUP menu
1.-
From
the
SETUP
screen, pressing
LEFT
or
RIGHT
you can
see what modules are available.
2.-
When you have the module you want to configure on the screen, press
ENTER
.
3.-
Once inside the setup menu, press the Arrow keys
LEFT
or
RIGHT
to move through the module setup options.
4.-
When the menu option you want to access is displayed, press
ENTER
or
DOWN
5.-
An arrow on the left-side of the selected option, means that you are into
the menu (Fig. 13.-). Now you can change the value displayed on the
screen or move to another menu.
Figure 13.-
Changing a parameter.
Page 20
04-2015
