GREAT BRITAIN • CUSTOMER SERVICE tel: 08545 300 9799
e-mail: [email protected] internet: www.clasohlson.com/uk
20131104
Digital Watch
Art.no 36-4045 Model YP08379/01
Please read the entire instruction manual before using the
product and save it for future reference. We reserve the right
for any errors in text or images and any necessary changes
made to technical data. If you have any questions regarding
technical problems please contact Customer Services.
Product description
Digital watch. Alarm, date, stopwatch with split time, double
time zones and background light. Water resistant to 100 m.
Face diameter of 42 mm. CR2025 battery (included).
Note
1. Never try to open the watch or to remove the back of
the casing.
2. Never push any of the buttons whilst under water.
3. The watch is constructed to handle impact or vibrations,
even so, try to avoid rough treatment.
4. Avoid exposing the watch to extreme heat.
5. Wipe the exterior with a dry cloth when needed.
Never use strong cleaning agents or solvents as this may
damage the plastic components of the watch.
6. Avoid exposing the watch to environments where there
is electromagnetic radiation.
Buttons
Use
Press [MODE] (B) repeatedly to advance through
the different functions in the following order:
Time – Alarm – Stopwatch – Dual time display.
A. RESET
B. MODE (Settings)
C. Backlight
D. Start/Stop
A
B
C
D
Day
Hours
Seconds
Date
Minutes
C. Stopwatch (SP)
• 1/100 second display
• Measuring range: 0
′
00
″
00 - 23
′
59
″
59
D. Dual time display (T2)
• Additional time zone display
A. Display current time
12/24 hour display
• Press [A] (in time display mode) to
select a 12 or 24 hour display mode.
Calendar display
• Press and hold [D] (in settings mode) to
display the Year, Month and Date.
Setting the time
1. Press and hold [A] (in settings mode)
until “00” (for seconds) starts to flash.
2. Press [D] to set the seconds to
00
.
4. Press [D] to increase. Hold the button in
to advance quickly.
5. Repeat steps 3 and 4 for the remaining settings.
Seconds – Hours – Minutes – Year – Month – Date.
6. Press [A] to exit time setting mode.
B. Alarm and hour signal
(AL is displayed)
Activation
• Press [D] (in alarm mode) in the following
order to activate/shut off the alarm and
hour signal:
3. Press [B] to confirm and advance to next
setting (hours).
Display
A. Current time display (Normal mode)
• 12/24 hour display
• Hours, Minutes, Seconds, Day, Date and
Year (2000 to 2099)
B. Alarm (AL)
• Sounds every hour
• The alarm will sound daily at the set time
Alarm and hour signal deactivated – alarm activated – hour
signal activated – Alarm and hour signal activated etc. Icons
for the set functions will be displayed.
Setting the alarm
1. Press and hold [A] (in alarm mode)
until “00” (for hours) starts flashing.
2. Press [D] to set the hours.
3. Press [B] to confirm and to
open the next setting (minutes).
4. Press [D] to increase. Hold the button
in to advance quickly.
5. Press [B] to exit the alarm setting mode.
