23
Chapter 6
OPERATING INSTRUCTIONS
Setting Up the Cartridge
1. Use the key to unlock and open the door.
2. Prepare the cartridge.
• Remove the plug from the TOP port (b) of the cartridge
• Remove the big plug from the air-intake port (a) on the flat surface (back side) of the top of the
cartridge.
(a) Air
Intake Port
(b) Top
Output
Port
(c) Front
Output
Port
NOTE for Wall-mounted and table-top installations:
FRONT Output Port MUST REMAIN PLUGGED for the cartridge to operate
in wall-mounted installations. Use the Top Output Port with the plastic
extension tube that comes with the unit, to deliver the fragrance. You
must use this tube when pluming out of the top.
NOTE for Wall-mounted and table-top installations:
FRONT Output Port MUST REMAIN PLUGGED for the cartridge to operate
in wall-mounted installations. Use the Top Output Port with the plastic
extension tube that comes with the unit, to deliver the fragrance. You
must use this tube when pluming out of the top.
NOTE for Track Light mounted installations:
Use the Front Output Port WITHOUT ANY TUBING. The TOP Output
Port MUST REMAIN PLUGGED for the cartridge to operate in track
light-mounted installations. If use of the front output port creates
condensation on the door, then switch to the Top Output Port. See the
section about Track Light-Mounted cartridge concerns.
6
