Prolitec AirQ AQ 1270 TT Original Instructions Manual Download Page 34

AQ/PS/RZ  1270

34

Chapter 14    

FAQs

Frequently Asked Questions (FAQs)

How does AQ1270 work?

AQ1270 uses a patented technology to convert liquid fragrance compounds into tiny droplets less 
than 1/100th the diameter of a human hair. By comparison, an aerosol droplet is 100 times bigger 
and 1,000,000 times heavier. AQ1270 droplets present 100 times more surface area to the air being 
treated, which means much less fragrance is used to create the scent effect. AQ1270’s tiny droplets 
are extremely light so they float easily into the air and disperse throughout a space to create an even 
scent effect. 

What size room will AQ1270 handle? 

AQ1270 is fully adjustable for different size rooms. AQ1270 is effective in spaces from 1,800 to 
150,000 cubic feet (50 to 4,245 cubic meters). The cubic measure is width x length x ceiling height. 

Where can I place AQ1270? 

AQ1270 should be placed on a wall where it can take full advantage of the natural air currents in the 
space as determined by a smoke test or as known by you. Accessory kits can be ordered for placing 
the unit on a ceiling (track light) or table top.

Do I need to adjust AQ1270?

Yes! AQ1270 is a powerful machine. AQ1270 can handle small and very large rooms. If it is set too 
high for the room size, it can cause discomfort for some people. Adjusting is simple. Take the time to 
do it right. 

How do I adjust AQ1270?

With the power cord plugged in you can adjust AQ1270 up and down using  the 

E

 and 

F

 buttons 

just to the right of the LCD screen. You can see the setting levels (1 to 50) on the right side of the 
LCD. ALWAYS START WITH THE RECOMMENDED SETTING and adjust upward in small steps. 

How strong should I make the scent?

Less is more. AQ1270 allows you to erase odors and use only a small amount of scent. Unlike most 
other air fresheners, AQ1270 is adjustable. Use this important feature. Always start on the lowest 
settings for the size of the space then adjust upward in small steps.

IMPORTANT

ALLOW ONE HOUR TO ASSESS the scent strength 
after starting or adjusting. It is best to assess strength 
when you first enter the room from another room.

How about safety? Is AQ1270 safe to use with children and pets?

When used as directed, AQ1270 is the safest air freshener available. Of course, it is important to read 
the Material Safety Data Sheets enclosed with each cartridge, which should be stored in a secure, 
visible location. 

14

Summary of Contents for AirQ AQ 1270 TT





































Reviews: