20
OPERATING INSTRUCTIONS
Setting Up the Cartridge
1. Use the key to unlock and open the door of the cartridge housing.
2. Prepare the cartridge.
• Remove the big plug
from the air-stem port (A)
on the back side of the
cartridge.
• Remove the black screw
cap from the top outlet
port (B) of the cartridge.
3. Insert the airstem into the
air-stem port in the
cartridge head. Rotate air
stem to locked position.
4. Place cartridge in the enclosure.
5. Place and tighten the plume kit
tightly on the cartridge outlet port.
6. If the appliance has been previously
programmed, activate preferred
setting. If not (see
), press
:
so the
backlight turns on, close and lock
the door.
7
2
3
4
B
A
