28
Output CURR: Output current calibration. Click value columns and it will pop up
. Then, each click is
0.1% no matter it’s pressing up or down key
. Press “up” key to increase 0.1% and press “down” key to
decrease 0.1%. Press “OK” key to confirm the modification.
INITIAL
INITIAL menu Page1
INITIAL
Datalog Page
DATA LOG: After clicking “DATA LOG”, it will pop up a message board as shown in above screen. Touch
“YES” to clear the DATALOG page. Touch “No” to cancel this operation. Touch “
” to return to
INITIAL menu page.
INITIAL
Parameter Page
PARAMETERS: After clicking “PARAMETERS”, it will pop up a message screen as shown in above screen.
Touch “YES” to restore default value
.
Touch “No” to cancel this operation. Touch “
” to return to
INITIAL menu page.
