PROLIGHTS - EclMini
CC
09
6 - CONNECTION TO THE EXTERNAL PSU OR LED DRIVER
Use only SELV remote control gear (max output voltage 60V). The unit must be powered only by Con-
stant Current PSU. To avoid damage, do not connect the unit to any Constant Voltage PSU. Installation
must be performed by a qualified person.
• ECLMINICC
: max current 500mA 36V 18W.
Led driver: constant current 500mA maximum output voltage 60Vdc, min 18W.
NOTE: Please take attention to the polarity of the connection.
1
Loosen and remove the marked four screws. Then remove the arm housing (1).
Fig. 04
Summary of Contents for EclMini CC
