9
ARCPOD27Q
3.5 LINKING
Multiple units can be connected so that all secondary units have the same lighting effect as the main unit
(Master).
1. 1. Connect the DMX OUT output of the main unit to the DMX IN input of the first secondary unit using
5 pole XLR cable.
2. 2. Connect the DMX OUT output of the first secondary unit with the DMX IN input of the second sec-
ondary unit, etc.
3.6 DMX ADDRESSING CONFIGURATION
To enter the DMX mode proceed as follows:
• In the main menu of the DATAMASTER select
RDM
.
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll through the menu, select the
Start Addrees
, then press the ENTER
button to access.
• Use the arrow buttons to set the desired value (
001-512
). Press the ENTER button to confirm.
• Press the MENU button repeatedly to exit the menu and to save the changes made.
3.7 DMX MODE CONFIGURATION
ARCPOD27Q has 5 DMX channel configurations.
• In the main menu of the DATAMASTER select
RDM
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll through the menu, select the
Pers. Mode
, then press the ENTER but-
ton to enter the next menu.
• Use the UP/DOWN button to select the desired DMX channel configuration (
5CH, 7CH, 10CH, 13CH, 17CH
),
then press the ENTER button to confirm the selection.
• Press the MENU button repeatedly to exit the menu and to save the changes made.
The tables on page 13, 14 and 15 indicate the operating modes and related DMX values. As an interface
DMX, the unit has 5-pin XLR contacts.
3.8 DMX ADDRESSING
For operation via a light control unit with DMX512 protocol, simply connect ARCPOD27Q to the controller.
The projector has a DMX channel configuration that can be accessed from the control panel. In order to
control ARCPOD27Q with a light control unit, the DMX start address must be set for the first DMX channel.
If, for example, the address 33 is provided on the control unit to control the function of the first DMX chan-
nel, the start address 33 must be set on the ARCPOD27Q. The other panel functions will be automatically
assigned to the following addresses.
Number of
DMX chan-
nels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
5
33
33-37
38
43
48
7
33
33-39
40
47
54
10
33
33-42
43
53
63
13
33
33-45
46
59
72
17
33
33-49
50
67
84
Summary of Contents for ARCPOD27Q
Page 1: ...USER MANUAL MANUALE UTENTE ARCPOD27Q OUTDOOR COMPACT WASHLIGHT EN IT...
Page 19: ......
Page 38: ......
Page 39: ......