Progressive Turf Equipment TDR-26, Operator'S Manual And Parts List

Page: 6 / 81

TDR-26
Operator’s Manual
4
OSHA Training Requirements (USA)
The following training requirements have been taken from Title 29, Code of Federal Regulations Part
1928.57 (a)(6). www.osha.gov
Operator Instructions: At the time of initial assignment and at least annually thereafter, the employer
shall instruct every employee in the safe operation and servicing of all covered equipment with which
he is or will be involved, including at least the following safe operating practices.
In other jurisdictions
It is good practice, following the initial instruction and at least annually thereafter, the employer shall
instruct every employee in the safe operation and servicing of all covered equipment with which he is
or will be involved, including at least the following safe operating practices.
ITEMS INCLUDED WITH TDR-26 MOWERS
TDR-26
Operator’s Manual & Parts List
Service instructions for PTO drive shafts and safety clutches
Cutting Height Adjustment Wrench
Blade balancer tool
SERIAL NUMBER LOCATION
The serial number plate for the machine is located on the left-hand front frame.
For quick reference, record the following information:
Model: TDR-26 __________
Serial Number: _____________ _____________
Date purchased: _____________ _____________
NOTE: The last digit in each TDR-26 serial number is a letter. This letter
denotes the deck configuration of the mower.
Blank - Painted Decks
G Galvanized Decks
REPLACEMENT PARTS INFORMATION
Use only Genuine Original Equipment Manufacturers (O.E.M.)
replacement parts. The use of “will fit” parts may reduce machine
performance, void machine warranties and present a safety hazard. Use
Genuine OEM parts.
UNAUTHORIZED MODIFICATION
Modifications to the original design of the TDR-26 mower, including the use of unauthorized
accessories or non-genuine OEM parts, may affect the reliability of the machine or make it unstable or
unsafe to operate and perform as originally designed and intended. Persons or organizations that
make unapproved modifications (including operation without provided guards and shields) assume all
liability arising from or related to the modification including any adverse effect on the machine.
No modification can be made to the original design or assembly of the TDR-26 mower (including any
and all attachments, safety or control devices) without the prior written consent of the Progressive Turf
Equipment Inc.
’s Engineering Manager (see contact information below). Progressive Turf Equipment
Inc. retains the right to reject all claims which arise from or are related to unauthorized modifications.