Progressive Turf Equipment TDR-26, Operator'S Manual And Parts List

Page: 5 / 81

TDR-26
Operator’s Manual
3
INTRODUCTION
Thank you for purchasing a TDR-26 series mower. Available with both powder coated deck skins and
optional galvanized deck skins, this product is designed and manufactured to allow safe and
productive mowing of large areas. A well-maintained machine will provide years of reliable service.
FOREWORD
This is the Operator’s Manual for the TDR-26 series mowers. Keep it with the mower at all times. This
manual is intended as a guide to the safe use and maintenance of the machine, so before you operate
this machine, study this manual carefully.
Replace this manual immediately if it becomes lost.
This manual is not considered all-inclusive, so for further information on specific components, e.g.
PTO shafts etc refer to the respective documents included with the manual set for this machine.
The TDR-26 series are production turf grass finishing rotary mowers with a 22 foot cutting width, and is
designed to be pulled by a 65-75 PTO horsepower tractor. High blade tip speed gives this versatile
mower the ability to mow both slightly contoured and flat terrain that requires a high quality after-cut
appearance. Full-width steel rollers reduce deck bounce during mowing and allow for higher mowing
speeds.
Features:
•
Three independent, fully floating decks
•
Low power input per cutting width
•
Cut height can be set on each deck between 1/2 inch and 4 inches
•
Full-width steel rollers on front and rear deck allow increased mowing speed
•
Automatic mechanical deck locks for transport
•
Optional galvanized steel deck skins for increased service life
Applications:
•
Turf grass farms
•
Park lands and recreational areas
•
Grass runways