TDR-26
Operator’s Manual
9
GENERAL SAFETY PRECAUTIONS
•
The operator of this machine must have sufficient knowledge and
instructions in the care and operation of this mower and the power
unit being used before he / she uses the machine. Do not allow
unauthorized persons or children to operate the machine. Do not
allow riders on the machine.
•
It is the obligation of the operator to make sure that all guards and
shields are in place on the machine. Safety decals must be in place
and be readable
– accidents may otherwise occur. Contact your
dealer or the manufacturer for replacement manuals or decals.
•
Never use a machine that does not have an operator’s manual
available. Learn and understand the safety signs and symbols on
the machine and the operator instructions before you begin to use
the machine.
•
Wear personal protective equipment. Know and use the protective
equipment that is to be worn when operating or servicing the
machine. Hard hats, protective glasses and face shields, protective
shoes, gloves, reflector type vests, and ear protection are types of
equipment that may be required. Prolonged exposure to loud noise
can cause hearing damage.
•
Never operate a mower while under the influence of drugs or
alcohol. These make reflexes slow and put you and others in grave
danger. Always make sure you have full concentration while
mowing.
•
Adhere strictly to all regulations at the worksite pertaining to the
operation of this equipment.
•
Always disengage power takeoff (PTO) when transporting or
traveling between work sites.
•
Be prepared for emergencies. Have a first aid kit, fire extinguisher
and emergency contact information available at the work site.
POWER UNIT SAFETY
•
The operator must have sufficient knowledge in the care and
operation of the power unit (tractor) before connecting power unit
to mower. Read and unde
rstand power unit operator’s manual
before connecting mower.
•
Power unit must be equipped with ROPS and seat belt. Foldable
ROPS must be secured in the upright position. Follow
recommendations of power unit manufacturer. Seat belt must be
worn at all times.
•
Power unit must be equipped with a 1-
3/8” 6 spline 540 RPM PTO
connection. Never use PTO adapters to connect implements.
Never connect mower driveline to 1000 RPM PTO.
•
Hydraulic circuits to control mower functions must be set to 2500
psi maximum working pressure.
Summary of Contents for TDR-26
