4.
Touch a sensor field or open the oven
door to stop the acoustic signal.
Setting the Time delay function
The DURATION and END can be
used at the same time, if the appliance is to
be switched on and off automatically later.
In this case, first set the DURATION and
then the END function (refer to "Setting
the DURATION" and "Setting the END" ).
When the Time delay function is
activated, the display shows a
static symbol of the oven
function, with a dot and .
The dot shows which clock
function is on in the Clock /
residual heat display.
AUTOMATIC PROGRAMMES
WARNING!
Refer to Safety
chapters.
There are 9 automatic programmes. Use an
automatic programme or recipe when you
do not have the knowledge or experience
on how to prepare a dish. The display
shows the shelf position and the default
cooking times for all automatic
programmes.
Automatic programmes
Programme number
Programme name
1
MEAT
2
FROZEN VEGETABLES
3
CHICKEN, WHOLE
4
MUFFINS
5
PIZZA
6
POTATO GRATIN
7
SWEET TART
8
WHITE BREAD
9
BRAISED MEAT
Automatic programmes
1.
Activate the appliance.
2.
Touch
.
The display shows and the number of
the automatic programme.
3.
Touch
or
to choose the
automatic programme.
4.
Touch
or wait five seconds until the
appliance automatically starts to work.
When you choose an
automatic programme with
microwave mode, the
appliance will not start
automatically if you do not
close the door. After you
close the door, confirm the
selection with
.
18
Progress
