Tekna Tilt 13
To lock it back, turn it inside to the using position until a click will indicate it is locked.
Removing and inserting the footplate frame
Push the lever A and simply pull the footplate frame up to remove it.
In order to insert the footplate frame, keep it turned outside, align the two holes F with the pins P of
the front frame and let it slide.
Finally, turn it inside to the using position until a click will indicate it is locked
Make sure it is securely locked following the instruction above mentioned.
If the model TEKNA TILT is equipped with the system swing in and out (5 - adult; 6 – junior with
abduction), check the footplate frame is securely locked in its support.
Check the footplate frame is securely locked to its support.
With one hand, take hold of the footplate frame and try to move it clock and anticlockwise. If it is
securely locked, the footplate frame will not rotate, but you should notice just a little play.
To swing the footplate frame externally, move the lever L
sideward to same direction and turn the footplate frame.
To swing the footplate frame internally, move the lever L
sideward to same direction and turn the footplate frame.
To lock the footplate frame to the using position, just swing it
to the middle until it automatically locks. A click will indicate
it has correctly locked.
Make a check as previously mentioned.
To remove the footplate frame, move
the lever L frontward and pull the
footplate frame up until the axle P
comes out of the tube T. Finally
remove the footplate frame.
To insert the footplate frame, first
lean the fork F on the tube T.
Then, lower the footplate frame until
inserting the axle P into the tube T.
If necessary, swing the footplate
frame to the middle until it
automatically locks. A click will
indicate it has correctly locked (the
lever L moves automatically to the
locking position).
Should the wheelchair be equipped with one-piece footplate, it is always necessary to
raise it before swinging the footplate frame away.
Should the wheelchair be equipped with double footplate, it is necessary to raise it only
if you swing the footplate frame internally.
Should the wheelchair be equipped with one-piece flip-up footplate, it is always
necessary to raise it before swinging the footplate frame away.
L
P
T
F
T
P
click
L
L
external
internal
