Mototronik 27
13
SETTINGS
You can change some operative parameters of the MOTOTRONIK and of the display by working on the display itself. All parameters shown are written in English.
To access and modify the setting of the parameters:
Press and hold the "
M
" button for at least 3 seconds to enter the settings menu.
Once you are in the menu, you can scroll and select the options by using the "
+
" or "
-
" buttons.
The selected option is highlighted.
To access the selected option, press the "
M
" button once.
You can modify the value of the option by using the "
+
" or "
-
" buttons.
The value of some parameters, even if not confirmed, can be tested without exiting the menu; the speed to perform the test, where applicable, will be the speed
level selected before entering the menu (it is not possible to change the speed level at this stage
–
you need to go back to the initial screen).
To confirm your choice, press the "
M
" button once; the display will show the settings menu again.
To exit from the menu, press and hold the "
M
" button for at least 3 seconds.
3"
M
M
1 click
M
M
3"
1 click
M
