How to start up
a Profort multiGuard unit outside Denmark
File:
Web opsætning af multiGuard ekstern GB
KAP side:
- 1 - af 6
dato: 03. marts 2021
Introduction:
1.
When setting up Profort multiGuard units outside Denmark, special handling is
required which at certain points differs from normal national (DK) setup.
2.
The telephone selection number must always start with a +, for example
+46(0)xxxxxxxx (zero is omitted) for Sweden.
3.
The startup procedure can be performed either at
Step 1.1
: sms/short
message -> device or
Step 1.2
device.
Prerequisites:
1.
The mobile system must be type 2G (GSM) or 3G (UMTS) with mobile data. SIM
cards must also be able to send / receive sms messages.
2.
The signal strength is checked by sending a sms with OK. The return value
must be at least 30% at 2G and minimum 20% at 3G.
Global overview of Telephone-pre-dialing numbers
Contents
Step 1.2 - Web software www.setup.masterview.dk-> device: ............................. - 3 -
