background image

KITCHEN

LIVING ROOM

BEDROOM

PATIO

PROTECTION

SS4VC 

Guidelines

• Use the Speaker Selector only with amplifiers rated at 125 

watts per channel or less.

• The Removable Terminal Connectors on the SS4VC accept 

wire up to 14 AWG. If you are not sure about the gauge of 

the wire you intend to use, please consult your Proficient 

installing dealer. 

• To avoid possible damage to your amplifier, pay careful atten-

tion to the section titled 

“Operation”

 on page 3. 

• One set of adhesive area labels are included for identifying 

the locations of speakers on the front of the Speaker Selector.

• Do not daisy chain (hook the outputs of one selector into the 

inputs of another) speaker selectors together. 

• Do not connect impedance matching volume controls to the 

speaker outputs of the selectors. Standard volume controls, 

such as Proficient models VCS60, VC60SL and VC60AW  should 

be used if separate room control is desired.

Placement

The suction feet securely hold the SS4VC in place when buttons 

are depressed.

SS4VC

4-Pair Speaker Selector with 

Impedance Balancing Volume Controls

Audio Systems

OWNER’S MANUAL

The SS4VC is a 4-Pair Speaker Selector with Impedance Balancing 

Volume Controls which allows the operation of multiple pairs of 

speakers when using one amplifier or receiver. Once the speakers 

are connected to the speaker selector, individual pairs may be 

turned on or off as desired using the push buttons on the front 

panel. A separate volume control for each pair allows the ability to 

control or limit speaker volume right at the selector. 

When engaged, a protection circuit allows the amplifier to 

operate safely, even when all selected speakers are playing. 

Installation utilizing the Removable Terminal Connectors 

makes wiring the selector to your speakers quick and easy. 

With a simple turn of a screw, wires are solidly fastened and a 

secure electrical bond is created. The process is quick, simple 

and eliminates the worry of wires becoming loose.

INTRODUCTION

INSTALLATION

Diagram 1

 

Protection Button

Area Selector Button

Suction Feet

Area Label

Volume Control Knob

Summary of Contents for SS4VC

Page 1: ...rely hold the SS4VC in place when buttons are depressed SS4VC 4 Pair Speaker Selector with Impedance Balancing Volume Controls Audio Systems OWNER S MANUAL The SS4VC is a 4 Pair Speaker Selector with Impedance Balancing Volume Controls which allows the operation of multiple pairs of speakers when using one amplifier or receiver Once the speakers are connected to the speaker selector individual pai...

Page 2: ...o the appropriate location under AMPLIFIER on the removable terminal Please observe proper polarity of the connections See Diagram 3 5 Insert the wired terminal connector into the amplifier input on the back of the speaker selector CAUTION If the AMPLIFIER and SPEAKERS connections are reversed a short could result across the amplifier or receiver out put terminals which may seriously damage your a...

Page 3: ...k of the selector there is a slide switch labeled Continuous Protection See Diagram 6 When this switch is in the ON position it will override the front Protection button and assure that the protection circuitry is always on no matter what the position of the front button This switch should be placed in the ON position if you are concerned that someone unfamiliar with the system may fail to properl...

Page 4: ...isuse abuse negligence inadequate packing or shipping procedures commercial use voltage inputs in excess of the rated maximum of the unit or service repair or modification of the product by unauthorized dealers This Warranty also excludes normal cosmetic deterioration caused by environmental conditions This Warranty will be void if the Serial Number on the product has been removed tampered with or...

Reviews: