background image

USER MANUAL

NEOS12PX

passive loudspeaker

KEY FEATURES

• Premium transducers
• Rotatable asymmetric HF horn
• HF driver protec  on
• Plywood cabinets with die-cast handles, dual-angle pole holder and mul  ple 

fl

 ying points

INTRODUCTION

NEOS PX series represents the highest expression of PROEL GROUP Research & Development applied in loudspeaker systems. A natural evolu  on 
of the NEOS Series, it incorporates the latest technologies developed by PROEL in advanced sound reinforcement systems able to provide premium 
sound, maximum performance and up-to-date features.
The NEOS PX are designed for the use both as high-performance mobile systems for live applica  ons and for advanced 

fi

 xed installa  ons.

The NEOS PX are able to provide an excep  onal sound de

fi

 ni  on together with very high dynamics and low distor  on in an ultra-compact 

package.
The NEOS PX passive 

fi

 lters are provided with a protec  on on circuit for the HF driver, which has a two-step opera  on: the 

fi

 rst step reduces the 

power accordingly to the music content and without an audible e

 ect; if a too high power level is present for a long period of   me, the second 

step shut the HF driver o

 .

TECHNICAL SPECIFICATION

Acous

Ɵ

 cal

Frequency Response Diagram

System type

Full range 2-way, vented

Low frequency driver

12’’ woofer - 2.5” VC

High frequency driver

1’’ compression driver - 1.75” VC

Frequency response

55 Hz - 20 kHz

Horn type

Asymmetrical rotatable horn

Coverage

100°>80° H x 60° V 

Max SPL

127 dB

Electrical

Nominal Impedance

8 ohm

Power Handling Con  nuous

350 W

Power Handling Peak

700 W

Sensi  vity

99 dBspl @ 1W / 1m

Passive Crossover Frequency

2000 Hz

Connectors

IN - LINK: Speakon® (NL4MP)

Controls

FULL-RANGE / BI-AMP opera  on (internal jumper)

Mechanical

Construc  on

15 and 18 mm birch plywood

Finish

An  -scratch black paint

Flying hardware

4 x M10 - top, bo  om, rear

Trapezoidal taper  

10°

Monitor taper  

42°

Pole holder

1 bo  om dual angle (0° / 7.5°)

Dimensions (W x H x D)  

400 x 600 x 365 mm

Weight

22 kg (48.5 lbs)

10k

5k

2k

1k

500

200

100

50

20

20

20k

Hz

110.0

dBSPL

100.0

90.0

80.0

70.0

60.0

Summary of Contents for NEOS12PX

Page 1: ... HF driver which has a two step opera on the first step reduces the power accordingly to the music content and without an audible effect if a too high power level is present for a long period of me the second step shut the HF driver off TECHNICAL SPECIFICATION AcousƟcal Frequency Response Diagram System type Full range 2 way vented Low frequency driver 12 woofer 2 5 VC High frequency driver 1 compre...

Page 2: ...or AC169A M10 black shoulder eyebolt COVERNE12 Loudspeaker so bag AC171 L 75 cm 30 inch Aircra cable sling FRE300BK Loudspeaker ground stand AC172 L 1 5 m 4 9 Aircra cable sling KP210BK Sub Speaker pole AC173 Screw pin anchor shackle KPPTL12 Loudspeaker wall stand KPTFL12PB Loudspeaker free aiming ground stand NL4FX Neutrik Speakon PLUG see www proel com for detailed descrip on and other available...

Page 3: ... serial number FULL RANGE BI AMP MODE The speaker system can operate both in FULL RANGE and BI AMP mode In FULL RANGE mode a built in crossover filter allows the loudspeaker to be powered by a single amplifier The BI AMP mode requires a dedicated amplifier for each speaker woofer and HF driver even if the internal crossover is not excluded we recommend the use of an external crossover or processor...

Page 4: ...from product receipt SAFETY INSTRUCTIONS To reduce the risk close supervision is necessary when the product is used near children Protect the apparatus from atmospheric agents and keep it away from water rain and high humidity places This product should be site away from heat sources such as radiators lamps and any other device that generate heat This product should be located so that its loca on ...

Reviews:

Related manuals for NEOS12PX