USER MANUAL
NEOS118AXS
digital self-powered subwoofer
KEY FEATURES
• Premium transducers
• C-AUDIO CLASS D power ampli
fi
ers with SWITCH MODE power supply
• 96KHz, 40bit
fl
oa ng point C-AUDIO CORE DSP
• Network func onality thru PRONET control so ware
• Access to EQ, DYNAMICS and DELAY and real me parameter control
• Plywood cabinets with die-cast handles, dual-angle pole holder and mul ple
fl
ying points
INTRODUCTION
NEOS AXS series represents the highest expression of PROEL GROUP Research & Development applied in loudspeaker systems. A natural evolu on
of the NEOS Series, it incorporates the latest technologies developed by PROEL in advanced sound reinforcement systems able to provide premium
sound, maximum performance and up-to-date features.
NEOS AXS is a complete range of self-powered loudspeaker systems combining cu ng-edge transducers with C-AUDIO CLASS D ampli
fi
ers and
digital processors, thus ensuring the best integra on between acous cs and electronics for an op mal performance.
The NEOS AXS are designed for the use both as high-performance mobile systems for live applica ons and as versa le and remotely controllable
systems for advanced
fi
xed installa ons.
All the models are powered by C-AUDIO DA power modules, a new genera on of CLASS D power ampli
fi
ers with SWITCH MODE power supply, able
to provide an excep onal sound de
fi
ni on together with very high dynamics and low distor on in an ultra-compact package.
The on board control electronics are based on the 96KHz, 40bit
fl
oa ng point C-AUDIO CORE DSP pla orm, able to op mize further the system
performances through the use of sophis cated EQ, crossover and dynamics algorithms. The CORE processing provides also network func onality
through the PRONET control so ware based on CANBUS communica on protocol (USB2CAN converter needed).
The PRONET control so ware provides access to the major processing features, including full PARAMETRIC and DYNAMIC EQ, advanced
COMPRESSOR/LIMITERS and DELAY, together with the real me control of parameters such as temperature, supply voltage and protec ons.
Se ng created by the user can be saved in user presets that can be recalled through the control so ware or from the unit’s interface.
TECHNICAL SPECIFICATION
Acous
Ɵ
cal
Mechanical
System type
Sub-woofer, vented
Construc on
15 and 18 mm birch plywood
Low frequency driver
18’’ woofer - 4” VC
Finish
An -scratch black paint
Frequency response
from 30 Hz
Flying hardware
2 x M10 - top
HP
fi
lter preset
120 Hz - 80 Hz
Pole holder
1 top
Coverage
omnidirec onal
Dimensions (W x H x D)
600 x 610 x 600 cm
Max SPL
133 dB
Weight
49.5 kg (109 lbs)
Electrical
Input Impedance
20 kohm balanced, 10 kohm unbalanced
Frequency Response Diagram
Input Sensi vity
+4 dBu / 1.25 V
black = 120 Hz gray = 80 Hz
Signal Processing
CORE processing 24 bit / 96 kHz
Ampli
fi
er type
C- AUDIO Class D with SMPS
Output power
1500 W
Connectors
IN - LINK: XLR M - XLR F
NETWORK IN - OUT: ETHERCON® (NE8FAV)
MAIN LINK: PowerCon® (NAC3MPB)
MAIN: PowerCon® (NAC3MPA)
Controls
LEVEL, PRESET (80 Hz / 120 Hz / 180° / USER)
TERMINATE, GND LIFT
Cooling
Variable speed DC fan
Power Supply
230 VAC or 120 VAC 50/60 Hz
Max consump on
2200 VA
1/8 power out consump on
730 VA
1k
500
200
100
50
20
20
1k
Hz
120.0
dBSPL
110.0
100.0
90.0
80.0
70.0
