USER GUIDE
TEUFL
V2.2 (05.12.2014)
1 (2)
Produal Oy
Keltakalliontie 18, 48770 Kotka FINLAND
Tel: +358 10 219 9100 / Fax: +358 5 230 9210
www.produal.com
Information is subject to change without prior notice.
COMMISSIONING
Wiring
Device wiring and commissioning can only be carried out by qualified professionals. Always make the
wirings while the power is switched off.
TEUFL and TEUFL-24
TEUFL-DI
5 6
1 2 3 4
+
-
in in
B
P
L
B battery (TEUFL and TEUFL-DI)
P potentiometer for setting the transmission interval
(6 s…30 min)
L
indicator light
Connecting the transmitter to the wireless network
The FLSER commissioning tool is needed for transmitter commissioning.
1.
Disconnect the transmitter power supply (battery / 24 V supply).
2.
Set the FLSER tool switch to the MID position.
3.
Push the + and - buttons to select the FLTA base station master ID (MID) to which you are connecting the
transmitter.
4.
Push the OK button.
5.
Set the FLSER tool switch to the S-RID position.
6.
Push the + and - buttons to select the sensor ID (SID) for the transmitter.
6
MID=
8
SID=
