C-73
Troubleshooting
Diagnostic Tools
Displaying the Configuration File
The complete switch configuration is contained in a file that you can browse
from either the web browser interface or the CLI. It may be useful in some
troubleshooting scenarios to view the switch configuration.
CLI: Viewing the Configuration File
Using the CLI, you can display either the running configuration or the startup
configuration. (For more on these topics, refer to Chapter 6, “Switch Memory
and Configuration”.)
Web: Viewing the Configuration File
To display the running configuration, through the web browser interface:
1.
Click on the
Diagnostics
tab.
2.
Click on
[Configuration Report]
3.
Use the right-side scroll bar to scroll through the configuration listing.
Listing Switch Configuration and Operation Details
The
show tech
command outputs, in a single listing, switch operating and
running configuration details from several internal switch sources, including:
■
Image stamp (software version data)
■
Running configuration
■
Event Log listing
■
Boot History
■
Port settings
Syntax:
write terminal
Displays the running configuration.
show config
Displays the startup configuration.
show running-config
Displays the running-config file.
3500-5400-6200-8200-MCG-Jan08-K_13_01.book Page 73 Monday, January 28, 2008 10:04 AM