manualshive.com logo in svg

ProCurve 3500yl Series, Management And Configuration Manual, Page: 663 / 732

Share
Download
ProCurve 3500yl Series Management And Configuration Manual Download Page 663

C-55

Troubleshooting

Debug/Syslog Operation

Syntax:

[no] logging facility <

 facility-name >

The logging facility specifies the destination subsystem used 
in a configured Syslog server. (All configured Syslog servers 
must use the same subsystem.) ProCurve recommends the 
default (user) subsystem unless your application specifically 
requires another subsystem. Options include:

user

 (default) 

—

 Random user-level messages

kern —

 Kernel messages

mail — 

Mail system

daemon —

 System daemons

auth — 

Security/Authorization messages

syslog —

 Messages generated internally by Syslog

lpr — 

Line-Printer subsystem

news —

 Netnews subsystem

uucp —

 uucp subsystem

cron —

 cron/at subsystem

sys9 —

 cron/at subsystem

sys10 - sys14 —

 Reserved for system use

local10 - local17 —

 Reserved for system use

Use the 

no

 form of the command to remove the configured 

facility and reconfigure the default (

user

) value.

For a list of supported ProCurve switches, refer to the Note on 
page C-43.

3500-5400-6200-8200-MCG-Jan08-K_13_01.book  Page 55  Monday, January 28, 2008  10:04 AM

Summary of Contents for 3500yl Series





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments