manualshive.com logo in svg

ProCurve 3500yl Series, Management And Configuration Manual, Page: 553 / 732

Share
Download
ProCurve 3500yl Series Management And Configuration Manual Download Page 553

B-23

Monitoring and Analyzing Switch Operation

Status and Counters Data

VLAN Information

The switch uses the CLI to display the following VLAN status:

For example, suppose that your switch has the following VLANs:

PortsVLANVID

A1 - A12DEFAULT_VLAN 1

A1, A2VLAN-33 33

A3, A4VLAN-44 44

The next three figures show how you could list data on the above VLANs.

Listing the VLAN ID (VID) and Status for ALL VLANs in the Switch. 

        

Figure B-16.  Example of VLAN Listing for the Entire Switch

Show Command

Output

show vlan

Lists:
• Maximum number of VLANs to support
• Existing VLANs
• Status (static or dynamic)
• Primary VLAN

show vlan <

vlan-id

>

For the specified VLAN, lists:
• Name, VID, and status (static/dynamic)
• Per-Port mode (tagged, untagged, forbid, no/auto)
• “Unknown VLAN” setting (Learn, Block, Disable)
• Port status (up/down)

3500-5400-6200-8200-MCG-Jan08-K_13_01.book  Page 23  Monday, January 28, 2008  10:04 AM

Summary of Contents for 3500yl Series





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments