manualshive.com logo in svg

ProCurve 3500yl Series, Management And Configuration Manual, Page: 157 / 732

Share
Download
ProCurve 3500yl Series Management And Configuration Manual Download Page 157

7-5

Interface Access and System Information

Interface Access: Console/Serial Link, Web, and Inbound Telnet

CLI: Modifying the Interface Access

Interface Access Commands Used in This Section

Listing the Current Console/Serial Link Configuration.  

This com-

mand lists the current interface access parameter settings.

Syntax:

show console

This example shows the switch’s default console/serial configuration.

Figure 7-2.  Listing of Show Console Command

Reconfigure Inbound Telnet Access.  

In the default configuration, 

inbound Telnet access is enabled. 

Syntax:

[no] telnet-server

To disable inbound Telnet access:

ProCurve(config)# no telnet-server

To re-enable inbound Telnet access:

ProCurve(config)# telnet-server

show console

below

[no] telnet-server

below

[no] web-management

page 7-6

console

page 7-6

Interface Access 
Enable/Disable

Console Control 
Options

Event Log Event 
Types To List

3500-5400-6200-8200-MCG-Jan08-K_13_01.book  Page 5  Monday, January 28, 2008  10:04 AM

Summary of Contents for 3500yl Series





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments