manualshive.com logo in svg

ProCurve 3500yl Series, Management And Configuration Manual, Page: 152 / 732

Share
Download
ProCurve 3500yl Series Management And Configuration Manual Download Page 152

6-40

Switch Memory and Configuration

Multiple Configuration Files

Xmodem: Copying a Configuration from a Serially
Connected Host

Operating Notes for Multiple Configuration Files

■

SFTP/SCP: The configuration files are available for sftp/scp transfer as 

/cfg/< 

filename

 >

.

Syntax:

copy xmodem config < 

dest-file

 > < pc | unix >

This is an addition to the 

copy xmodem

 command options. Use 

this command to download a configuration file from an 
Xmodem host to the switch. 

For more on using Xmodem to copy a file from a serially 
connected host, refer to “Xmodem: Copying a Configuration 
File from a Serially Connected PC or UNIX Workstation” on 
page A-26.

3500-5400-6200-8200-MCG-Jan08-K_13_01.book  Page 40  Monday, January 28, 2008  10:04 AM

Summary of Contents for 3500yl Series





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments