ProCurve 1810-8G, Installation And Getting Started Manual, Page: 23 / 62

3-3
Configuring the Switch
Where to Go From Here
3. In
General
tab, under
Components checked are used by this
connection
, click to select
Internet Protocol (TCP/IP)
, and then
click
Properties
to open
Internet Protocol (TCP/IP) Properties
dialog box.
4. In
Internet Protocol (TCP/IP) Properties
dialog box, click to select
Use the following IP address
.
5. In
IP address
,
Subnet mask
, and
Default gateway
, type your
intended information.
6. Click
OK
to save the changes and quit.
Where to Go From Here
For more information on the Web browser interface and all the
features that can be configured on the ProCurve Switch 1800-8G, see
the
ProCurve Series 1800 Switch Management and Configuration
Guide , which is available on the ProCurve Networking Web site,
http://www.procurve.com
.