manualshive.com logo in svg

ProCurve 10ag, Installation And Configuration Manual, Page: 96 / 132

Share
Download
ProCurve 10ag Installation And Configuration Manual Download Page 96

C-2

Safety and EMC Regulatory Statements

Informations concernant la sécurité

■

LAN cables may occasionally be subject to hazardous transient voltages 
(such as lightning or disturbances in the electrical utilities power grid). 
Handle exposed metal components of the network with caution.

■

This product and all interconnected equipment must be installed indoors 
within the same building, including all associated LAN connections 
as described by Environment A of the IEEE 802.3af standard.

Servicing

There are no user-serviceable parts inside this product. Any servicing, adjust-
ment, maintenance, or repair must be performed only by service-trained 
personnel.

This product does not have a power switch; it is powered on when the power 
cord is plugged in.

Informations concernant la sécurité

Bases

Suivant le modèle, votre produit sera classé comme un équipement conforme 
à la classe de sécurité I ou II. Les équipements de la classe I doivent être 
raccordés à la terre (fiche 3 broches), tandis que les équipements de la classe 
II intègrent une fiche 2 broches. 

Classe I : 

La source d'alimentation principale doit être munie d'une prise de 

terre de sécurité installée aux bornes du câblage d'entrée, sur le cordon 
d'alimentation ou le cordon de raccordement fourni avec le produit. Lorsque 
cette protection semble avoir été endommagée, débranchez le cordon 
d'alimentation jusqu'à ce que la mise à la terre ait été réparée.

Symbole de référence à la documentation. Si le produit est marqué 
de ce symbole, reportez-vous à la documentation du produit afin 
d'obtenir des informations plus détaillées.

WARNING

Dans la documentation, un WARNING indique un danger susceptible 
d'entraîner des dommages corporels ou la mort.

CAUTION

Un texte de mise en garde intitulé CAUTION indique un danger 
susceptible de causer des dommages à l'équipement.

Ne continuez pas au-delà d'une rubrique WARNING ou CAUTION 
avant d'avoir bien compris les conditions présentant un danger 
et pris les mesures appropriées.

!

Summary of Contents for 10ag





































































































































Reviews:

No comments