Procom MD100HBA Owner'S Operation And Installation Manual Download Page 1

VENT-FREE GAS WALL 

HEATER

OWNER’S OPERATION AND 

INSTALLATION MANUAL

BLUE FLAME MODELS

MD100TBA, MD200TBA 

MD300TBA, MD100HBA

MD200TBA-BB MD300TBA-BB

Questions, problems, missing parts? 

Before returning to your retailer, call 

our customer service department at 1-866-573-0674, 7:30 am - 4:15 pm CST, 

Monday through Friday or email

 [email protected]

PFS

®

US

 

WARNING: If the information in this manual is not 

followed exactly, a fire or explosion may result causing 

property damage, personal injury or loss of life.
—  Do not store or use gasoline or other  flammable va-

pors and liquids in the  vicinity of this or any other 

appliance.

—  WHAT TO DO IF YOU SMELL GAS

•  Do not try to light any appliance.

•  Do not touch any electrical switch; do not use any 

phone in your building.

•  Immediately call your gas supplier from a neighbor’s 

phone. Follow the gas supplier’s instructions.

•  If you cannot reach your gas supplier, call the fire 

department.

—  Installation and service must be performed by a quali-

fied installer, service agency or the gas supplier.

 

WARNING: This appliance is equipped for Natural and 

Propane gas. Field conversion is not permitted other than 

between natural or propane gases.

Summary of Contents for MD100HBA













































































Reviews: