Backside:
Power connector:
No
Description
Wire-color
1
+9 – 30V DC
Red
2
0V
Black
3
E/A
Green
4
E/A
White
Hardware-installation
1.) Remove the SIM card slot tray(s) with the pin needle. Insert your SIM card(s) and push the tray(s) back into
the router. Correct SIM card orientation can be seen in the figure below :
2.) Attach LTE, WiFi and GPS antennas
3.) Connect the power adapter to the power socket located on the front panel of the device. Then plug the other
end of the power adapter into a power outlet.
4.) Connect to the CONNECT-CONTROL-device wirelessly or use an Ethernet cable.
