First commissioning :
–
CONNECT/CONNECT-LTE creates WLAN network with SSID "CONNECT WIFI"
–
with active DHCP master (laptop is automatically assigned an IP address)
–
Connect laptop to this WiFi network and open with
browser the webserver with IP: http://192.168.1.1:
Peculiarity:
Menu item LTE modem :
only visible with CONNECT-LTE, here first enter the pin number of
the standard SIM card with volume tariff.
The APN "internet" is standard for most providers, but can be
changed if necessary.
Insert the SIM card on the right side of the device as shown until
there is a slight click, then release the card (it is locked in place)
[Reverse to trigger, click until noise and let go => Card extends]
LTE-LED:
flashing slowly :
Searching network
permanent ON:
Network found
flashing rapidly :
communication
Menu item LAN settings:
only visible with CONNECT-LTE if placement "FACTORY" and
operating mode "BRIDGE" .
Enter the IP address/subnet of the PLC machine side here
Set these parameters according to your requirements.
