Page 48
Press
and
and select
„Measure mode“ to
activate average readings.
A faster way is to press the symbol
in the main
window.
If the symbol
is shown, the average reading is
activated.
13.3.3 Pass/Fail
Press
and
and select
„Measure mode“ to
activate the pass/fail function.
Minimum reference value for a specimen of
retroreflective material (e.g. traffic sign, safety garments
etc.) can be defined for each observation angle by setting
a lower limit.
If a measured value exceeds this minimum value, the
criterion is fulfilled and the measuring values appear
green. Otherwise they will be red.
13.4 Timer
– Interval timer
Press
and
and select
„Timers“ to activate the
interval timer.
With this function continuous measurements will be
taken. The measurements will be taken continuously until
the indicated number of interval counts has been
reached.
