Page 21
4.7 Panel switches
The panel switches are located on the car’s main panel. They are used to power the
system and its components on and off.
Main power on/off
Measuring head on/off
Laser on/off
Main:
Main switch that powers the following components on and off:
•
Power supply unit (car box)
•
Tablet docking station
•
Camera
Head:
Switches on the measuring head. The boot-up procedure may take
as long as 20 seconds. It is ready to operate when the yellow status
LED on the measuring head is blinking.
The measuring head is only powered when the main switch is on.
Laser:
Switches on the levelling lasers in the measuring head.
The lasers are only powered on when the measuring head switch is on as
well.
The ZDR 6020 consumes a lot of power during operation. It is therefore
essential that the car engine is always running while the system is switched
on.
Laser radiation class 2. Avoid direct eye contact to beam.
