Page 16
4.2 Measuring head
The measuring head is designed to be mounted on either side of the measuring
vehicle or on a stationary test stand.
A real-time computer inside the measuring head controls and monitors the data
acquisition process. Furthermore, it streams the measured values to the
RetroGrabber software on the tablet.
White front light
3 Status LEDs
Auxiliary laser (factory use only)
Observation optics
Mounting hole for sunshade
Levelling laser (front wheel)
Removable cooling-air inlet
Illumination optics
Safety glass
Red backlight
Serial number
Levelling laser (rear wheel)
Removable cooling-air outlet
Cable and connector plug
