Seite 27
The most important settings can be accessed directly from the main screen. The
menu is used for any additional settings.
7.1.1 Manual moving
The drawing unit (23
) can be moved using the „Manual forward“
and „Manual
back“
buttons. If one of these buttons is pressed, the drawing unit (23) starts to
move slowly. If the button is held for more than a second, the speed will increase.
Alternatively the drawing unit (23) can also be moved by hand by applying forward
or backward pressure at the middle of the weight (7).
7.1.2 Zero the drawing unit
The current position of the drawing unit (23) can be set to 0 by pressing the
„Zero“
button.
7.1.3 Draw
The application process is
started by pressing the „Draw“ button. Depending on the
drawing mode selected, the draw button shows a straight arrow
for “Single”
mode or a curved arrow
for “Reverse” mode.
7.1.4 Pause
Position indicator
Length indicator
Speed indicator
Layout indicator
Manual
back
Manual
forward
Zero
Menu
Draw
Pause
Lock
