Seite 19
5.1 Disassemly for transport
To prevent transport damage, the device has to be disassembled as follows:
•
Remove the temperature controller.
•
Loosen and remove the knurled screw (16) to remove the weight (7). First turn
the weight upwards by 90 ° and
– in reversed order as at the assembly - first
take one side of the weight then the other out of the guides.
•
Remove the screw of the adjustable start stop (1) and end stop (2).
•
Remove the side panels (17), by unscrewing the fixing screws (18).
•
Remove both side parts of the holding device (8), by unscrewing their fixing
screws.
•
Remove the clamping device (5), the inserted plate, the back heating plate
holder (21) and the front heating plate holder (22).
•
Remove the isolation plate (20).
•
Reassemble both side panels (17), the one with slit on the right side, the other
one on the left side.
•
Refasten the previously removed screws of the start (1) and end stop (2).
•
Move both adjustable stops (1 & 2) to the middle of the device.
•
Screw in the four black rubber feet.
•
Only transport the device in its original packaging.
Disassembled device before and after transport:
5.2 Startup
Connect the device to a power socket with the supplied power cable and turn on the
main switch (15).
Switch on the device by pressing the power button (10). The device will be ready
after a short start-up phase.
