Page 42
9
Converting from crockmeter into basic unit
Thanks to its modular construction, the automatic universal unit can be equipped
with different kits for carrying out applications, washability, crocking and scratch
resistance tests.
Before mounting an optional modification set, the device has to be converted
to basic unit.
Always unplug the power cable before assembling and/or converting the unit.
•
Push the start stop (1) and the end stop (2) to the centre of the device and
remove them afterwards.
•
Loosen the fixing screws of the side panels (16) and remove the side panels
(15).
•
Loosen the Allen screws of the tool holder-side part (5) and remove the tool
holder (18).
•
Remount the side panels (15), the one with slit on the right side, the other one
on the left side.
•
Remount the screws of the start stop (1) and end stop (2).
•
Check if the four rubber feet are mounted.
Basic unit
