probst POWERPLAN PP, Operating Instructions Manual, Page: 25 / 230

Operating Instructions
PP General information
24 / 73
V4 GB
4.7 Technical data
Model : POWER PLAN PP
Drive power: 18,5 kW (25,2 HP)
Engine: Diesel engine V1505-E4-B
Please refer to the engine (KUBOTA) and combined cooler’s
(EMMEGI) operating manuals for their technical data
Cylinder capacity: 1.498 cm³
Equivalent permanent sound level LpA: 82 dB[A]
Vibration values:
Effective acceleration value acting on the upper limbs: < 2.5 m/s²
Effective acceleration value acting on the body: < 0.5 m/s²
Undercarriage: Crawler tracks
Please refer to the crawler undercarriage’s (TFW) operating
manual for the technical information
Speed control: Continuous hydrostatic drive
Speeds:
Driving setting 0 1.6 km/h
Driving setting 1 3.2 km/h
Weights & Measurements:
Max. total weight: 6,000 kg (13,200 lbs)
Dead weight: 2,500 kg
Hopper volume: approx. 2.5 m³
Transportation measurements (Compact): 1.900 x 2.050 x 3.400 mm (75“x81“x134“) (H x B x L)
Carrying capacity: 3,500 kg (7,700 lbs)
On-board voltage: 12 V DC
Installation depth (sub-base height) 16 cm
Filling capacities:
Fuel tank: 30 litres (tank filling is sufficient for ca. 8-10 working hours)
Engine oil: 6 litres
Hydraulic fluid: 30 litres
Operating fluids:
Fuel: Diesel (Ultra low sulfur diesel fuel
[sulfur content < 0.0015% (15 ppm)]
DO NOT USE BIO DIESEL.
Engine oil: SAE 15W-40 / API-CF4
Hydraulic fluid: HLP46 (hydraulic fluid as specified under ISO 2943)
RKM filter, 100/15 µm (filter mesh)
Lubricating grease: Conventional high-performance multi-purposes grease