probst POWERPLAN PP, Operating Instructions Manual, Page: 18 / 230

Operating Instructions
PP Safety
17 / 73
V4 GB
3.14 Maintenance
Risk of personal injury and damage to property
Failure to perform maintenance work properly can lead to injury and environmental damage.
•
The machine must only be maintained by qualified personnel and as specified in the operating
instructions. See “Personnel requirements”.
•
Only perform maintenance work on level and adequately load bearing ground.
•
Only open the engine hood when the engine has been switched off.
•
Adequately secure the components that need to be maintained to prevent them from falling
down.
•
Switch off the main switch to prevent the electrical system from becoming damaged and the
machine from being accidentally started.
•
Do not place any metal objects or tools onto the battery.
•
Only use original Probst spare parts and approved operating fluids. Failure to do so will void
the warranty.
•
In winter, only fuel the machine using winter diesel.
•
Reattach and/or reconnect all safety equipment, such as the EMERGENCY STOP button, engine
hood, etc. before restarting the machine.
•
Observe the relevant environmental protection, recycling and disposal regulations.
Risk of personal injury and damage to property
If the machine’s electrical system is not in perfect working order, there is a risk of injury and
damage.
•
The electrical system must always be kept in proper working order.
•
Do not operate the machine if any of its fuses are missing.
•
Replace broken fuses immediately.
•
Always switch off the electrical system by switching off the main switch before commencing
any work on the electrical system and in particular before disconnecting electrical lines.
•
If jump-starting the machine, the charging circuit must be 12 V.
•
Only use digital multimeters or voltmeters to test the electrical system. Do not use a test lamp.
Risk of personal injury and damage to property
Failure to perform the machine’s first scheduled inspection can lead to injury and damage.
•
The first inspection must be performed after 50 operating hours.
Risk of personal injury and damage to property
There is a risk of fire and explosions when performing maintenance and inspection work.
•
Never refuel the machine when the engine is running.
•
Do not smoke.
•
Do not use open flames.
•
Keep a fire extinguisher within reach.
•
Store cleaning cloths that are soaked with flammable fluids in non-combustible, sealed
containers.