background image

3

PROBRITE.COM

Please call 1-844-507-5651 or email [email protected] for further assistance.

2

Visit 

www.probrite.com/install

 for installation video tutorials and product support

Table of Contents.........................  2
Safety Information.......................  2
Pre-Installation............................. 3

   Planning Installation....................  3

   Specifications.................................  3

   Tools Required...............................  3

   Hardware Included........................  4

   Package Contents.........................  4

Installation..................................... 5
Installation (Extension Arm)...... 10
Operation  ..................................... 14
Care & Cleaning...........................  15
Troubleshooting.......................... 15
Warranty....................................... 16

Table of Contents

Safety Information

IMPORTANT

THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE 

NATIONAL ELECTRICAL CODE AND LOCAL BUILDING CODES BY A PERSON FAMILIAR 

WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS 

INVOLVED.

PRECAUTIONS

 

Please read and understand this entire 
manual before attempting to assemble, 
install, or operate this light fixture.

 

This light fixture requires a 120-277Volt 
AC power source.

 

Some codes require installation by a 
qualified electrician.

 

This light fixture must be properly 
grounded.

 

Make sure connections are secure 
using wire nuts, crimp-on lugs or other 
approved connecting devices

 

This light fixture should be installed 
outdoors to a wall or a pole.

 

This product may contain chemicals 
known to be hazardous. Thoroughly 
wash hands after installing, handling, 
cleaning or otherwise touching the 
product.

WARNING: 

Turn the power off at the circuit 

breaker or fuse. Place tape over the circuit 

breaker switch and verify power is off at the 

light fixture.

WARNING: 

Risk of fire. Keep the lamp heads at 

least 3 in. (76mm) from combustible materials.

CAUTION: 

Burn hazard. Allow the light fixture 

to cool before touching.

NOTICE: 

For dimming use a 0-10V dimming 

switch

Pre-Installation

PLANNING INSTALLATION

Before installing the light fixture, ensure that all parts are present. Compare parts with the 

Hardware Included 

and 

Package Contents

 sections. If any part is missing or damaged, do 

not attempt to assemble, install, or operate this light fixture.

Estimated installation time: 

20 minutes

SPECIFICATIONS

TOOLS REQUIRED

Phillips 
Screwdriver

Wire strippers/ 
cutters

Circuit tester

Safety 
goggles

Work 
gloves

Silicone 
Sealant

Ladder

NOTICE: 

FCC Regulations state that any 

unauthorized changes or modifications to 

this equipment not expressly approved by the 

manufacturer could void the user’s authoriza-

tion to operate this equipment. 

MODEL

NOVA 100W

NOVA 150W

Lumens (Light Output)

12000 Lumens

18000 Lumens

Watts (Power Consumption)

100 Watts LED

150 Watts LED

Replaces

250 Watt PSMH

400 Watt Metal Halide

Lumens/Watts (Efficacy)

120 lumens per watt

120 lumens per watt

Power Requirements (Input Voltage)

120-277VAC

Light Color (CCT)

4000 Kelvins (Bright White)

Dimmable

Dimming (Use with 0-10V dimming switch)

Surge Protection

10kV 

Optic Distribution Type

Type IV

Operating Modes

Dusk-to-Dawn: 

Automatically turns light fixture ON during night 

and OFF during day.

 

Switch-Controlled: 

Flip switch to turn light fixture ON and OFF. 

Use 

included light sensor cap on fixture's light sensor 

to utilize this mode setting.

Wrench

Power
Drill

INFORMATION: 

The device is tested and found to comply with Part 15 of the FCC Rules. Operation is subject 

to two conditions: (1) This device may not cause harmful interference and, (2) this device must accept any 

interference received, including any interference that may cause undesired operation.

These limits are designed to provide reasonable protections against harmful interference when the 

equipment is operated in a commercial environment.

Summary of Contents for NOVA100-PC-4K-BZ











Reviews: